HENKOInternational Trading Ltd Request a quote
Home / Insights / FAQ: sampling under ISO 2859-1, what PSL means, and what our warranty covers

FAQ: sampling under ISO 2859-1, what PSL means, and what our warranty covers

Plain answers to three questions we get on every enquiry: how our lots are sampled, what PSL means, and what the warranty does and does not cover.

Insights

Article

2026-11-23

How does the ISO 2859-1 sampling on your lots actually work?

Every lot we accept goes through sampling inspection by an independent inspection company, and the plan is fixed in our contracts: ISO 2859-1, general inspection level II, major AQL 1.0, single sampling, normal inspection.

What that means in practice:

  • The lot size drives the sample size. Under ISO 2859-1, your lot size maps to a sample-size code letter in the standard's Table I, and the code letter gives the number of pieces to draw. Bigger lots, bigger samples - the standard does the arithmetic, not the supplier.
  • AQL 1.0 is the quality bar we hold lots to. It is the single acceptance quality limit we use everywhere - in the contract, in the third-party report, in our own acceptance. We do not run a looser limit behind the scenes.
  • The accept/reject numbers belong to the standard, and to the inspection body. The acceptance number (Ac) and rejection number (Re) for a given sample size come from the standard's tables. On our shipments they are filled in on the inspection body's own report, against its own copy of the standard. We deliberately do not print those figures in our own documents - when you need them, read them from the report, where they are traceable to the issuing body.
  • A rejected lot is held, not argued with. If the sample trips the plan, the lot does not ship as-is: it is screened, reworked and re-inspected, or rejected.

What sampling does not do: it characterises a lot. It is not a 100 percent check and not a performance certificate on each individual piece - which is exactly why the file that ships with your parts also carries 100 percent and per-lot records: certificates, measured dimensions, hardness, NDT and pressure tests.

What is a PSL, and what should I do with it in an enquiry?

PSL means product specification level. It is a concept inside API specifications such as API Spec 6A (wellhead and tree equipment, published as ISO 10423) and API Spec 16C (choke and kill equipment, union connections): the specification splits its requirements into levels, and each level states how much material control, traceability, testing and qualification you are demanding for that order. In 6A the levels run from 1 to 4; the higher the level, the more verification the standard requires - things like additional NDE, more traceability, and qualification of the design.

How to use the term as a buyer:

  • Put the PSL in your enquiry, and ask for the requirements it triggers. "Fig 402, PSL 3" is a purchasing instruction: it tells the supplier which band of the standard's requirements to meet. The right response is a quotation that states what it will actually deliver against that level - material class, NDE scope, test regime, traceability.
  • Check the standard text, not the marketing. A PSL is a set of requirements written in the specification. If a supplier answers a PSL question with a slogan instead of requirements, ask them to cite what the level calls for and what they will provide.
  • Know what a PSL is not. It is a design, material, testing and traceability level. It is not a service-life rating, and it says nothing about how long a wear part will last in your sand and under your pressure.
  • About certification marks: some mills hold licences from API to mark products; that is the mill's status, verifiable in the API licensee directory. We do not claim such certification for ourselves or describe our suppliers by it - what we commit to is the specification, the tests and the documents that ship with your lot.

If your project specifies a PSL, send us the specification call-out with your enquiry. We will quote against it and show you in the shipment file how each requirement was verified.

What does the warranty actually cover?

Stated plainly, and fixed in writing in the warranty terms annexed to your contract:

  • Period: 12 months from commissioning, max 18 months from delivery - whichever comes first.
  • Scope: material and workmanship defects only. If the steel, the heat treatment, the coating or the making of the part was wrong, that is on us.
  • Exclusions: wear items excluded. Normal wear, and corrosion or erosion caused by the fluid you pump, are how wear parts work themselves out - they are not defects. Operation outside the duty conditions you confirmed, and non-original parts, are likewise outside the warranty.
  • How you claim: a third-party test report plus a written nonconformity notice naming the batch and the certificate numbers. You do not need to produce running logs or prove how long the part was in service.
  • What we do about it: replacement or credit, subject to the caps stated in the contract.

One boundary worth understanding, because it is where most confusion lives: the warranty covers defects, not wear. A seat that washes out because sand did its job is wear; a seat that cracks because the material or the treatment was wrong is a defect. And the documents that ship with your lot - the conformance file - are what make the second case provable months later, without an argument about who was at fault.

The full terms, including the caps and the exclusions, are in the Warranty Terms Sheet annexed to your Sales Contract. If a marketing sentence and the contract disagree, the contract wins - that is our rule, in writing.

Next

Keep reading

Back to Insights Request a quote